- Product Details
GLAS.t Premium Tempered glass screen protector
SGP's Steinheil GLAS.t is made to protect the LCD from damage and scratches with specially processed glass that has been reinforced to increase shock absorbency.
The GLAS.t is 0.4mm thick and made with chemically treated, transparent tempered glass.
Surface hardness : 8~9H
The surface of the GLAS.t has a hardness of 8-9H, three times stronger than regular PET film. Even sharp objects such as knives and keys will not scratch the GLAS.t.
The GLAS.t has an oleophobic coating that prevents fingerprints and other contaminants and makes the film easy to clean.
The GLAS.t is coated on the back with a strong silicon adhesive that makes installation easy and attaches the film firmly so as to not affect the touch screen's sensitivity.
If broken, the GLAS.t breaks into small pieces that are not sharp, making it safer than other glass products.
CAUTION * As this is a glass product, please note that the edges of the glass are the most vulnerable areas. We highly recommend that you use case along with your GLAS.t to avoid chipping or cracking the edges of your GLAS.t.
* When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to reuse the GLAS.t once it's been applied. * Using excessive force when installing or removing the screen protector may damage the product.
Q. How do I install the GLAS.t?
A. Use the provided alcohol swab to clean your Galaxy Note. The tab labeled "Back 2" is the protective film that covers the adhesive (sticky) side of the screen protector. The tab labeled "Front 1" is the protective film that covers the front of the GLAS.t. Remove the Back tab and apply the screen protector to the Galaxy Note screen aligning with the earpiece. Squeegee any bubbles and then remove the Front tab when finished. The GLAS.t is a one-shot install. This means that once the screen protector is applied completely to the iPhone, it cannot be removed and reapplied. Make sure the GLAS.t is centered before laying down the GLAS.t. The GLAS.t is 0.4 mm thick and will recess the home button. For easy access to the home button, please apply the home button stickers provided with your GLAS.t package.
Q. How do I remove the GLAS.t?
A. The GLAS.t can be removed by using a hard card like an ID or credit card. Lift the GLAS.t with the card from any corner of the screen protector. Once the corner has been lifted off the iPhone, hold the corner and remove slowly. If the GLAS.t cracks, it will not shatter. The GLAS.t will not damage or leave residue on your iPhone screen.
Q. Is the Glas.t a dry installation?
A. Yes. The phone screen should be completely dry when installing the GLAS.t. When you use the alcohol swab to clean the surface of your phone, please leave it to completely dry before installing the GLAS.t. If the surface is not dry, then it can affect the adhesive silicone and cause it to not adhere to the screen and/or create air bubbles resulting from the wet installation.
Q. What cases will work with the GLAS.t?
A. All of our SPIGEN SGP Galaxy Note cases will work with the GLAS.t. For other brands, some slider cases may not work with the GLAS.t. The GLAS.t is 0.4 mm thick so if you have any doubts, please contact the case manufacturer.
Q. Is there anything I should take caution of when using the GLAS.t?
A. The GLAS.t is a product made of glass. While it is tempered to shatter within the film when dropped, there are some things that need to be aware of when using the GLAS.t. As with most glass products, the edges of the GLAS.t is the most vulnerable areas on the screen protector. This means the edges are the most likely to chip or crack when pressure or force is applied to it. If you see that the edges have chipped or have cracks, please remove the GLAS.t from your device as this can be potentially harmful. Please take care that your device is not accessible to children if your GLAS.t begins to crack.
We highly recommend that you use a case along with your GLAS.t screen protector to avoid chipping along the edges
Q. What if I had more questions about the product?
A. Not a problem, just contact our Product Development Customer Support team on HelpDesk! www.spigen.com/contacts
- Does the job Review by mike
Quality Design Value
Bought after my first note's screen got scratched in 1 week (returned).
Has been very good for over a year!
At the 1 year mark, dropped my note about 2 feet and a portion of the screen "unglued" on the side and left a half-quarter sized air bubble but was easy to live with.
Just today dropped my phone from 4 feet onto a hard floor face down. Screen protector split into 5 large pizza slices, but did the job and protected the phone very nicely. I have it inside a bulky zenus case ad it fits very nicely, which probably saved the GLAS.t from shattering into a million pieces.
My only issue is that once my second one arrives in Canada I will have spent the best part of $100s on 2 screens since I got the phone! Very nice product though
(Posted on 4/3/13)
- Great protector Review by Vic
Value Quality Design
I have to say, I am very impressed with this product. I've had it for 3 months and it's still looking good. It fits nicely with the Otterbox Commuter case and it stood up to heavy abuse with the S-Pen and a few other things. I actually managed to scratch the protector within a month, but it's barely noticeable. It's actually very faint and unless I go looking for it I won't notice it at all.
Also, it is best to follow Spigen's advice and have it in a case protector that can protect its edges from chips and cracking. Once chipped or cracked, the integretity of the screen is compromised and will crack/shatter more easily. Otherwise, it's a very solid product.
(Posted on 8/27/12)
- outstanding Review by dave
Quality Design Value
the GLAS.t is easy to install and covers the Galaxy Note properly. I put an Otterbox Defender case over it after removig the Otterbox screen protector. Fits great! The GLAS.t feels like the original glass that is on the Note. Can't say enough good things about the GLAS.t ... best screen protector out there.
(Posted on 7/30/12)
- great product Review by jjun
Design Value Quality
I'm glad to have found this product. It's a simple installation process- just put it on and even out surface with a squeege. My phone looks only better knowing it's well protected.
(Posted on 5/15/12)
- Glas T. is so amazing Review by Daniella
Design Value Quality
My brother got Glas t. for his ipad, and it looked sooo cool. I finally found glas t. for galaxy note, and it's just so amazing so far!
(Posted on 5/3/12)